收藏本站
LT3599
APPLICATIONS INFORMATION
Using the T SET Pin for Thermal Protection
The LT3599 contains a special programmable thermal
regulation loop that limits the internal junction temperature
of the part. Since the LT3599 topology consists of a single
boost converter with four linear current sources, any LED
string voltage mismatch will cause additional power to be
dissipated in the package. This topology provides excellent
Two external resistors program the maximum IC junction
temperature using a resistor divider from the V REF pin, as
shown in Figure 8. Choose the ratio of R1 and R2 for the
desired junction temperature. Table 6 shows commonly
used values for R1 and R2 (see T SET graph).
Table 6. Resistor Values to Program Maximum IC Junction
Temperature
current matching between LED strings and allows a single
power stage to drive a large number of LEDs, but at the
price of additional power dissipation inside the part (which
means a higher junction temperature). Being able to limit
the maximum junction temperature allows the bene?ts of
this topology to be fully realized. This thermal regulation
feature provides important protection at high ambient tem-
peratures, and allows a given application to be optimized
T J (°C)
100
105
110
115
120
135
145
R1 (k)
80.6
82.5
82.5
84.5
84.5
84.5
90.9
R2 (k)
53.6
53.6
51.1
51.1
49.9
44.2
44.2
for typical, not worst case, ambient temperatures with the
assurance that the LT3599 will automatically protect itself
and the LED strings under worst-case conditions.
The operation of the thermal loop is simple. As the ambi-
ent temperature increases, so does the internal junction
temperature of the part. Once the programmed maximum
junction temperature is reached, the LT3599 begins to
linearly reduce the LED current, as needed, to try and
maintain this temperature. This can only be achieved
when the ambient temperature stays below the desired
maximum junction temperature. If the ambient tempera-
ture continues to rise past the programmed maximum
junction temperature, the LEDs’ current will be reduced
to approximately 5% of the full LED current.
While this feature is intended to directly protect the LT3599,
it can also be used to derate the LED current at high
temperatures. Since there is a direct relationship between
the LED temperature and LT3599 junction temperature, the
T SET function also provides some LED current derating at
Programming Switching Frequency
The switching frequency of the LT3599 is set between
200kHz and 2.1MHz by an external resistor connected
between the RT pin and ground (see Table 7). Do not
leave this pin open.
Selecting the optimum switching frequency depends
on several factors. Inductor size is reduced with higher
frequency, but ef?ciency drops due to higher switching
losses. In addition, some applications require very high duty
cycles to drive a large number of LEDs from a low supply.
Low switching frequency allows a greater operational duty
cycle and, hence, a greater number of LEDs to be driven.
In each case, the switching frequency can be tailored to
provide the optimum solution. When programming the
switching frequency, the total power losses within the IC
should be considered.
Table 7. Switching Frequency
high temperatures.
V REF
SWITCHING FREQUENCY (MHz)
2.1
2.0
R T (k)
20
21.5
R2
LT3599
1.5
31.6
T SET
R1
3599 F08
Figure 8. Programming the T SET Pin
1.0
0.5
0.4
0.3
0.2
53.6
121
154
210
324
3599fe
14
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LT3743EFE#PBF IC LED DVR HP CONST CURR 28TSSOP
LT3745IUJ#TRPBF IC LED DVR 16CH 50MA 40QFN
LT3746IUHH#TRPBF IC LED DRIVER 32CHANNEL 56-QFN
LT3754IUH#TRPBF IC LED DVR 16CH 50MA 32QFN
LT3755EMSE#PBF IC LED DRVR HP CONS CURR 16-MSOP
LT3760EFE#PBF IC LED DVR WHT/CLR BCKLT 28TSSOP
LT3799IMSE#PBF IC LED DRIVER TRIAC DIM 16-MSOP
LT3956EUHE#PBF IC LED DVR BUCK BOOST 36-VQFN
相关代理商/技术参数
LT3599IFE#TRPBF 功能描述:IC LED DRVR WHITE BCKLGT 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极，PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3599IFEPBF 制造商:Linear Technology 功能描述:LED Driver 40-Seg 3.3/5/9/../24V TSSOP28
LT3599IFE-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:4-Channel 120mA LED Driver with ±1.5% Current Matching
LT3599IFETRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:4-Channel 120mA LED Driver with ±1.5% Current Matching
LT3599IFE-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:4-Channel 120mA LED Driver with ±1.5% Current Matching
LT3599IUH 制造商:LINER 制造商全称:Linear Technology 功能描述:4-Channel 120mA LED Driver with ±1.5% Current Matching
LT3599IUH#PBF 功能描述:IC LED DRIVR WHITE BCKLGT 32-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 恒定电流:- 恒定电压:- 拓扑:升压（升压），切换式电容器（充电泵） 输出数:1 内部驱动器:是 类型 - 主要:背光 类型 - 次要:白色 LED 频率:625kHz ~ 875kHz 电源电压:2.7 V ~ 5.3 V 输出电压:5V 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商设备封装:10-µMAX 包装:带卷 (TR) 工作温度:-40°C ~ 85°C
LT3599IUH#PBF 制造商:Linear Technology 功能描述:LED DRIVER BOOST PWM 2.06MH 制造商:Linear Technology 功能描述:LED DRIVER, BOOST, PWM, 2.06MHZ, QFN-32